Armour Load Anchors

Stronger, Faster, Safer and More Efficient Way to Secure Freight

The Load Anchors are a patented new method of securing items direct to the decks of trucks in the freight industry. The revolutionary design allows the unit to be raised during operation but stored flush to the deck when not in use. This technology provides higher load stability and cleaner more efficient methods of attachment for securing load harnesses to the truck deck. The eyes are forged to enhance strength and stability.

  • Flush Mounted
  •  Self Cleaning
  •  Easy to Install
  •  Easy to Use
  •  Won't clog or freeze
  •  Safer operation
  •  Certified
The Load Anchor provides a means of securing loads to transport vehicles which was previously achieved through less rigorously compliant methods. The Load Anchor improves the system of load restraint at high weight tolerances and provides a quick and efficient means for securing a wide variety of payloads.

Armourttt

Press the center pad and raise the anchor for easy access

 NEW 12T FLIP OVER

Armoutt Load Anchor 12t
Armoutt Load Anchor 12t
Armoutt Load Anchor 12t
Armoutt Load Anchor 12t
Armoutt Load Anchor 12t
Armoutt Load Anchor 12t

NEW 12Tonne FLIP OVER Load Anchor

Stronger, Faster, Safer and More Efficient Way to Secure Freight & Oversized Equipment

Capable of being retro-fitted to existing truck decks or custom fitted during the construction of new truck bodies the Load Anchor has the potential to be the industry standard for a previously unanswered problem.

The Load Anchor provides a means of securing loads to transport vehicles which was previously achieved through less rigorously compliant methods.

The Load Anchor improves the system of load restraint at high weight tolerances and provides a quick and efficient means for securing a wide variety of payloads. 

Load Anchors Specifications

The new generation Load Anchor come in the following models (sizes):

Armourttt

Notes

  •  The working load limit (WLL) is defined as the maximum load that a load anchor should receive during regular use. In North America the WLL is typically one-third (1/3) of the Breaking Strength capacity.
  •  1,000 daN is approximately 1,000kg or 2,200lbs.
  •  The new designs meet the stringent EU Lashing requirements.
ATT is looking for partners to commercialise this technology in each region - if you are interested then please contact us

ArmourTT Load Anchor

Load Anchor Components

The Armour 2.5T Utility and 6T Load Anchors is designed to restrain a chain or other suitable load bindings. The direction from which a load may be applied is shown below:

The Armour Load Anchor consists of an "eye" for attaching the load binding, a sealing plate (Armour Push plate) and a housing. The Armour Push Plate has no structural function and is loose fitting so that it expels dirt when it is moved either by hand or movement of the vehicle. The eye may be raised by pressing down on the Armour Push Plate through the hinge end of the hole in the eye. For this reason and because the eye swings down at the hinge end it is important that the underside of the housing is left open and clear of obstructions.

Armourttt

The 12T Armour Load Anchor direction from which a load may be applied is shown below:

Armourttt

OUR CONTACT INFO

Armour Transport Technologies Ltd

Barry Armour

  • Mobile: +64 (0)274 340 664
  • Phone: +64 3 488 4308
  • Fax: +64 3 488 4489
  • Email: barry@armourtt.com

Location

  • Postal: PO Box 7040 Dunedin
  • Head office: 170 Dukes Road North, Mosgiel 9092
  • Dunedin, New Zealand